How to solve the common failure of high-speed circular saw machine?
During the use of high-speed circular saw machines, you will encounter various problems, some of which are common in daily life. Knowing how to deal with them yourself will make companies that use high-speed circular saw machines more efficient and save unnecessary time. and cost. Below, the Antis high-speed circular saw machine manufacturer will introduce in detail some basic common sense problems and solutions:
FAQ 1. The circular saw blade suddenly stops working or the equipment stops moving
solution:
Most of the time this situation occurs, it is a line problem. You should cut off the power immediately, check the line, test whether the voltage is stable, whether the power supply is normal, whether the ground wire is connected, whether there are any instruments and equipment nearby that may affect the voltage, etc. There is another situation. It is a problem with the equipment itself. Check whether there is anything stuck in the saw blade, or other parts should also be checked; if there is a problem with the equipment itself, it needs to be checked by a professional.
FAQ 2. The equipment sounds very loud when the operator is operating
solution:
The vast majority of possibilities are bearings, such as grinding wheel discs that are eccentric, damaged, gear damage, etc. If such hardware is damaged, you should contact the supplier for repair or replacement.
FAQ 3. The high-speed circular saw machine vibrates greatly from time to time
solution:
First check whether the equipment is placed upright or uneven, check whether the equipment bearings are in good condition, the machine casing should be kept intact, whether the grinding wheel of the equipment is eccentric, etc., and finally check whether the gears are intact and whether the bearing seat is worn; if If there is still no way to solve the problem, contact the manufacturer immediately for processing.
FAQ 4. The protective shell on the high-speed circular saw machine is worn
solution:
When purchasing equipment, the company should carefully check the integrity of the equipment. If the protective shell is found to be damaged or worn during use, it may be caused by human negligence, such as: a staff member accidentally pressed the equipment with force, or the time of use If it is too long, the temperature is too high during use and melts, or the time is too long and wear occurs, etc., please contact the manufacturer for replacement.
FAQ 5. Metal circular saw equipment produces smoke
solution:
This kind of phenomenon usually means that the equipment is entering the aging stage, which is also inevitable. However, if the equipment has just been purchased not long ago, it is likely to be caused by a long-term lack of maintenance. If the company does not care about the cleaning of the equipment, There is no reasonable rest period if the transition is not used as required; another situation is that the equipment parts are aging, or the metal circular saw blade has reached the end of its service life and needs to be replaced. When this happens, the equipment should be stopped immediately , carefully troubleshoot the fault, and wait until the problem is resolved before you can start it again.
FAQ 6. Odor occurs in machine tools and equipment
solution:
If the operator finds an odor in the equipment while working, he should stop the equipment immediately and cut off the power supply. It may be due to a circuit problem and a system check of the equipment may be required, or the equipment may be exhausted and produce odor caused by high temperature; if it is not If you can find out the situation, you should ask a professional to come and repair it.
The above is an introduction to common problems and solutions in daily life of high-speed circular saw machines. I hope it can help everyone! As a machine tool supplier with many years of technology accumulation, ANTISHICNC service team can provide you with suitable machines. If you also need a high-speed metal circular saw machine, please inform us of your processing needs, and Antis sales will reply to you as soon as possible. And match the right model for you.
Key words:Metal circular sawing machine, circular sawing machine, sawing machine.